G. MANTAS - MANTAXYL S.A

Contact Us    |   Ελληνικά

MANUAL PANEL SAW/SIZING UNITS

MANUAL PANEL SAW/SIZING UNITS SEMIAUTOMATIC PANEL  SAW/SIZING UNITS AUTOMATIC PANEL  SAW/SIZING UNITS PANEL SAW/SIZING ELECTRONIC PROGRAMMER
2500 x 1250 4300 x 2200 4200 x 2200 4300 x 2200
3200 x 1850 5300 x 2200 4300 x 2200 5300 x 2200
4200 x 2200   5300 x 2200 4100 x 2100
4000 x 2200     5100 x 2100
5300 x 2200                                  Contact Us

2500 x 1250 mm working cut and 45 mm thickness



3200 x 1850 mm working cut and 45 mm thickness
4200 x 2200 mm working cut and 45 mm thickness
4000 x 2200 mm working cut and 50 mm thickness
3200 x 1900 mm working cut and 50 mm thickness
4200 x 2200 mm working cut and 50 mm thickness
3200 x 1900 mm working cut and 60 mm thickness
4200 x 2200 mm working cut and 60 mm thickness
4300 x 1950 mm working cut and 80 mm thickness
4300 x 2200 mm working cut and 80 mm thickness
5300 x 2200 mm working cut and 80 mm thickness


The vertical panel saws have been designed to carter for limited cuts requirements .
These machines are easy to use , of simple design and is lightweight and practical.
Though not suitable for large production requirements or continued operations throughout the workday, they are able to successfully cater for the needs of anyone having to saw small quantities of panels. This range of vertical panels saws has been designed to cater for the needs of workshops /firms which , though not having large quantities of materials to be cut, still want precision and practical operation from their machines and who are reluctant to use portable circular saws, fixed carriage vertical panel saws units or horizontal circular saws which are inconvenient, imprecise and take up a lot of room.
Such persons will find that our vertical panel saws offer the solution they have been looking for to all their problems.



back to top



SEMIAUTOMATIC PANEL  SAW/SIZING UNITS


          4300 x 2200 mm working cut and 80 mm thickness (automatic vertical cut)
          5300 x 2200 mm working cut and 80 mm thickness
(automatic vertical cut)



The continuous research and testing of the materials used, the improved processing, the controls carried out during production and final tests have enabled us to create top-quality vertical panel saws.
The agile and sturdy structure, which can be completely demounted, allows for the extremely simple and precise cutting of large quantities of material.
The vertical panel saws KGS/630 S semi-automatic version (automatic vertical cut),KGS/660 S automatic version and with electronic programmer for horizontal cutting, have been produced with pacesetting hi-tech and will an accurate safety system according to the current standards.
The continuous equivalent average acoustic radiation pressure 72,0 +/- 2 dBA (idling), 82,0 +/- 2 dBA (processing).



back to top

 

AUTOMATIC PANEL  SAW/SIZING UNITS

 

4200 x 2200 mm working cut and 60 mm thickness


An automatic vertical panel sawing machine with enbloc welded structure and cast
aluminium cutting assembly. This easy-to-operate machine ensures very high
production outputs.
The rigid and stable enbloc structure and the strong and precise cutting assembly
provide top-quality high production outputs.
Innovative technological solutions have been used to obtain a reduced-cost
panel sawing machine that provides excellent performance, high reliability and
utmost ease of use. Safety systems in compliance with applicable regulations.
KGS/42-22 A panel sawing machine is an indispensable working tool.
Average equivalent continuous acoustic pressure level 70.0 2 dBA (empty);
76 2dBA (operating).



back to top




4300 x 2200 mm working cut and 80 mm thickness
(automatic vertical and horizontal cut)



The continuous research and testing of the materials used, the improved processing, the controls carried out during production and final tests have enabled us to create top-quality vertical panel saws.
The agile and sturdy structure, which can be completely demounted, allows for the extremely simple and precise cutting of large quantities of material.
The vertical panel saws KGS/630 S semi-automatic version (automatic vertical cut),KGS/660 S automatic version and with electronic programmer for horizontal cutting, have been produced with pacesetting hi-tech and will an accurate safety system according to the current standards.
The continuous equivalent average acoustic radiation pressure 72,0 +/- 2 dBA (idling), 82,0 +/- 2 dBA (processing).

back to top

         

5300 x 2200 mm working cut and 80 mm thickness
(automatic vertical and horizontal cut)



The continuous research and testing of the materials used, the improved processing, the controls carried out during production and final tests have enabled us to create top-quality vertical panel saws.
The agile and sturdy structure, which can be completely demounted, allows for the extremely simple and precise cutting of large quantities of material.
The vertical panel saws KGS/630 S semi-automatic version (automatic vertical cut),KGS/660 S automatic version and with electronic programmer for horizontal cutting, have been produced with pacesetting hi-tech and will an accurate safety system according to the current standards.
The continuous equivalent average acoustic radiation pressure 72,0 +/- 2 dBA (idling), 82,0 +/- 2 dBA (processing).

 

 

back to top

   PANEL SAW/SIZING ELECTRONIC PROGRAMMER     

4300 x 2200 mm working cut and 80 mm thickness
(electronically programmable horizontal cut and automatic in vertical cut)



The KGS/660 S - EM6 model is a vertical panel saw/sizing unit with an electronic programmer for programmed control of horizontal cuts.
On this machine in fact, up to 15 cuts can be performed with different measurements, each repeatable 90 times. Vertical cutting is done automatically with traditional beam unit coupling fixed points.
The KGS/660 S - EM6 is therefore ideal for performing cuts in high positions, to repeat horizontal work programmes.
The vertical panel saw/sizing machine mod. KGS/660 S - EM6 has been designed to incorporate leading-edge technological solutions and highly-efficient safety systems that comply with applicable regulations.
Equivalent average continuous level of sound pressure 72.0 ± 2 dBA (empty), 82 ± 2 dBA (working).


5300 x 2200 mm working cut and 80 mm thickness
(electronically programmable horizontal cut and automatic in vertical cut)



The KGS/660 S - EM6 model is a vertical panel saw/sizing unit with an electronic programmer for programmed control of horizontal cuts.
On this machine in fact, up to 15 cuts can be performed with different measurements, each repeatable 90 times. Vertical cutting is done automatically with traditional beam unit coupling fixed points.
The KGS/660 S - EM6 is therefore ideal for performing cuts in high positions, to repeat horizontal work programmes.
The vertical panel saw/sizing machine mod. KGS/660 S - EM6 has been designed to incorporate leading-edge technological solutions and highly-efficient safety systems that comply with applicable regulations.
Equivalent average continuous level of sound pressure 72.0 ± 2 dBA (empty), 82 ± 2 dBA (working).




4100 x 2100 mm working cut and 80 mm thickness
(electronic numeric control on two axes)



The mod. KGS/700 ELCTRONIC SYSTEM vertical panel saw is the only (vertical) unit of its kind in the world featuring an electronic programmer capable of performing sequence cuts and executing the entered work program order in a totally reliable, precise and speedy manner. The KGS/700 E.S. unit is capable of executing any type of cutting or scoring operation, from the simplest A-B-C-D to the most complicated E-F cutting diagrams. Doors and windows can also be made inside the panel by entering cutting data in the programmer (G.) The panel saw can be connected by serial output to a P.C., from which it can receive data such as: cutting optimization, work program memor y increase, display of cutting diagrams. The KGS/700 E.S. can solve any type of work problem and ensures practical, reliable and safe operation.

Possibility of setting 90 programs, each of which may contain 18 different measures that can be repeated 99 times. Both absolute and incremental values may be inserted into the programmer, as well as saw-blade thickness, clearance recovery and length of cut to be carried out. Moreover, it is possible to adjust working speed, positionig and quick-return. It is possible to choose the cutting sequence: horizontal + vertical, or vertical + horizontal. For horizontal cuts, processing from up- downwards - or viceversa - may be chosen. The KGS/700 ELECTRONIC SYSTEM makes it possible to work as follows: in the automatic mode, by setting the cutting values on the programmer display; in the semiautomatic mode, by manually positioning the sawing-head on the measure desired and manually carrying out measures and cuts. The continuous equivalent average acoustic radiation pressure 72,0 +/- 2 dBA (idling), 82,0 +/- 2 dBA (processing).


5100 x 2100 mm working cut and 80 mm thickness
(electronic numeric control on two axes)



The mod. KGS/700 ELCTRONIC SYSTEM vertical panel saw is the only (vertical) unit of its kind in the world featuring an electronic programmer capable of performing sequence cuts and executing the entered work program order in a totally reliable, precise and speedy manner. The KGS/700 E.S. unit is capable of executing any type of cutting or scoring operation, from the simplest A-B-C-D to the most complicated E-F cutting diagrams. Doors and windows can also be made inside the panel by entering cutting data in the programmer (G.) The panel saw can be connected by serial output to a P.C., from which it can receive data such as: cutting optimization, work program memor y increase, display of cutting diagrams. The KGS/700 E.S. can solve any type of work problem and ensures practical, reliable and safe operation.

Possibility of setting 90 programs, each of which may contain 18 different measures that can be repeated 99 times. Both absolute and incremental values may be inserted into the programmer, as well as saw-blade thickness, clearance recovery and length of cut to be carried out. Moreover, it is possible to adjust working speed, positionig and quick-return. It is possible to choose the cutting sequence: horizontal + vertical, or vertical + horizontal. For horizontal cuts, processing from up- downwards - or viceversa - may be chosen. The KGS/700 ELECTRONIC SYSTEM makes it possible to work as follows: in the automatic mode, by setting the cutting values on the programmer display; in the semiautomatic mode, by manually positioning the sawing-head on the measure desired and manually carrying out measures and cuts. The continuous equivalent average acoustic radiation pressure 72,0 +/- 2 dBA (idling), 82,0 +/- 2 dBA (processing).



back to top